Arthur Harris stainless steel cabinet pulls.
Stainless steel knobs and stainless steel cabinet pulls. T-pulls too. Stainless steel is the choice in medical office hardware. Great sanitary value. Grade 303. European Railing pulls as seen on HGTV - available in custom sizes upon request. Great for SubZero refrigerators too! Looking for cabinet handles for outdoor
kitchens or patio kitchens? Stainless steel is an excellent choice for indoor and outdoor cabinet hardware. Page last updated July 2008 |
|
 |
|
|
Our Cabinet Hardware and Bathroom Hardware products are available to everyone: homeowners, contractors, cabinet makers, woodworkers, hotels, designers and
architects, and any do-it-yourselfer. Pricing is shown for all products except custom made cabinet doors; cabinet doors
are quoted as requested. We ship anywhere in the USA, US territories, Canada, Europe, Australia, and many other countries! Please place your orders on-line, via fax, mail order, or they can be phoned in. |
|
|
|
|
|
Stainless Steel Cabinet Pulls
~~Bar style pulls with minimal tails~~
made of premium grade 303 SOLID stainless steel
|
Pricing is listed in the 4 charts way below.
Pulls are available only in the stainless steel brushed finish.This page will look similar to the normal long handles
page. After the first picture, there will be images of the handles with the standoffs mounted to the far ends of the bar. All overall lengths can be made to the sixteenth of an inch. Note that each bar
diameter will have a slightly different center to center (CTC) ratio to overall length (OL). 
From left to right: BN series, BJ series, BS series, BF series.
For the end standoff mounted handles: (note CTC ratio to OL is shown in bold) The BS Series: pull legs (standoffs) are 3/8" in diameter and 1" high; pull barrels (bars) are 1/2" in diameter.
Overall pull height is 1-1/2". Hole center to center (CTC) spacing is 1/2" less than overall pull length (OL). The BF Series:
pull legs (standoffs) are 5/16" in diameter and 1" high; pull barrels (bars) are 3/8" in diameter. Overall pull height is 1-3/8". Hole center to center (CTC) spacing is 7/16"
less than overall pull length (OL). The BJ Series: pull legs (standoffs) are 1/2" in diameter and 1" high; pull barrels (bars) are 5/8" in diameter.
Overall pull height is 1-5/8". Hole center to center (CTC) spacing is 5/8" less than overall pull length (OL). The BN Series:
pull legs (standoffs) are 5/8" in diameter and 1" high; pull barrels (bars) are 7/8" in diameter. Overall pull height is 1-7/8". Hole center to center (CTC) spacing is 3/4"
less than overall pull length (OL). The BN Series is great for long refrigerator handles or tall pantry doors. It makes a bold statement. Pull ends are machined beveled for a smooth feel.
All are custom made and custom lengths made to the sixteenth of an inch.
Pricing custom length pulls below. To order, please use part numbers shown in the girds lower on the page.
|
A close up of the end of the handle. The tail of the handle is 1/16", this is the minimum overhang Arthur Harris can do. It is uniform for all 4 bar diameters. Shown below is the BS series
handles.
 |
Side view of the end mounted standoffs sytle handles.
|
Same picture as above but taken with a flash. Handles are a brushed finish and they do have a very nice reflective quality to them.
|
This first table of part numbers, sizing, and pricing is for the BS series. 1/2" dia. bar with 3/8" dia. standoffs.
Note that the pull center to center (CTC) measurements are 1/2" less than the overall length (OL).
BS Series length 30" and longer have a 3rd standoff (leg) in the bar.
NOTE: We are not going to create a part # for all 16 measurements within each inch range. The size range is from the whole number and 1/16" to the next whole number.
IT IS VERY IMPORTANT TO ALSO
STATE YOUR OVERALL LENGTH TO THE SIXTEENTH OF AN INCH AFTER THE EQUALS SIGN (=) IN THE PART NUMBER.
|
Generic part number |
Length range in inches (from - to) |
Price each |
ARH-BS.end6= |
5-1/16" to 6" |
$16.83 |
ARH-BS.end7= |
6-1/16" to 7" |
$19.00 |
ARH-BS.end8= |
7-1/16" to 8" |
$21.17 |
ARH-BS.end9= |
8-1/16" to 9" |
$23.34 |
ARH-BS.end10= |
9-1/16" to 10" |
$25.51 |
ARH-BS.end11= |
10-1/16" to 11" |
$27.68 |
ARH-BS.end12= |
11-1/16" to 12" |
$29.85 |
ARH-BS.end13= |
12-1/16" to 13" |
$32.01 |
ARH-BS.end14= |
13-1/16" to 14" |
$34.18 |
ARH-BS.end15= |
14-1/16" to 15" |
$36.35 |
ARH-BS.end16= |
15-1/16" to 16" |
$38.52 |
ARH-BS.end17= |
16-1/16" to 17" |
$40.69 |
ARH-BS.end18= |
17-1/16" to 18" |
$42.86 |
ARH-BS.end19= |
18-1/16" to 19" |
$45.03 |
ARH-BS.end20= |
19-1/16" to 20" |
$47.20 |
ARH-BS.end21= |
20-1/16" to 21" |
$49.37 |
ARH-BS.end22= |
21-1/16" to 22" |
$51.54 |
ARH-BS.end23= |
22-1/16" to 23" |
$53.71 |
ARH-BS.end24= |
23-1/16" to 24" |
$55.88 |
ARH-BS.end25= |
24-1/16" to 25" |
$58.04 |
ARH-BS.end26= |
25-1/16" to 26" |
$60.21 |
ARH-BS.end27= |
26-1/16" to 27" |
$62.38 |
ARH-BS.end28= |
24-1/16" to 28" |
$64.55 |
ARH-BS.end29= |
28-1/16" to 29" |
$66.72 |
ARH-BS.end30= |
29-1/16" to 30" |
$68.89 |
ARH-BS.end31= |
30-1/16" to 31" |
$71.06 |
ARH-BS.end32= |
31-1/16" to 32" |
$73.23 |
ARH-BS.end33= |
32-1/16" to 33" |
$75.40 |
ARH-BS.end34= |
33-1/16" to 34" |
$77.57 |
ARH-BS.end35= |
34-1/16" to 35" |
$79.74 |
ARH-BS.end36= |
35-1/16" to 36" |
$81.91 |
ARH-BS.end37= |
36-1/16" to 37" |
$84.08 |
ARH-BS.end38= |
37-1/16" to 38" |
$86.24 |
ARH-BS.end39= |
38-1/16" to 39" |
$88.41 |
ARH-BS.end40= |
39-1/16" to 40" |
$90.58 |
ARH-BS.end41= |
40-1/16" to 41" |
$92.75 |
ARH-BS.end42= |
41-1/16" to 42" |
$94.92 |
ARH-BS.end43= |
42-1/16" to 43" |
$97.09 |
ARH-BS.end44= |
43-1/16" to 44" |
$99.26 |
ARH-BS.end45= |
44-1/16" to 45" |
$101.43 |
ARH-BS.end46= |
45-1/16" to 46" |
$103.60 |
ARH-BS.end47= |
46-1/16" to 47" |
$105.77 |
ARH-BS.end48= |
47-1/16" to 48" |
$107.94 |
If you need lengths greater than 48", and up to 96" long,
for the BS series calculate pricing at $2.35 per inch in EXCESS of 48" + $167.99.
Example:
a 61-3/16" pull would be rounded up to 62". ((62-48) x 2.35) + 167.99 = $200.89 for the pull.
Part number for this pull would look like: ARH-BS.end62=61-3/16".
|
Having trouble calculating a size for pre-existing holes? For example, you are looking for a 2-3/4" CTC handle. Since the CTC ration to
OL in the BS series is 1/2", you would need a handle 3-1/4" long to achieve a 2-3/4" CTC. Thus the part number would look like: ARH-BS.end4=3-1/4" But do note, in the BJ series, the ratio is 5/8", and
7/16" in the BF series. There are notes above each price grid about the ratio of CTC to OL. |
For Arthur Harris quantities of 25 or more, 10% off the prices below.
For quantities of 50 or more, 15% off the prices below.
Mix and match knobs and pulls or sizes to meet quantity breaks for this special!
This includes all standard and custom sizes.
This second table of part numbers, sizing, and pricing is for the BJ series. 5/8" dia. bar with 1/2" dia. standoffs.
Note that the pull center to center (CTC) measurements are 5/8"
less than the overall length (OL). BJ Series length 36" and longer have a 3rd standoff (leg) in the bar. NOTE:
We are not going to create a part # for all 16 measurements within each inch range. The size range is from the whole number and 1/16" to the next whole number.
IT IS VERY IMPORTANT TO ALSO STATE YOUR OVERALL LENGTH TO THE SIXTEENTH OF AN INCH AFTER THE EQUALS SIGN (=) IN THE PART NUMBER.
|
Generic part number |
Length range in inches (from - to) |
Price each |
ARH-BJ.end6= |
5-1/16" to 6" |
$21.55 |
ARH-BJ.end7= |
6-1/16" to 7" |
$24.40 |
ARH-BJ.end8= |
7-1/16" to 8" |
$27.24 |
ARH-BJ.end9= |
8-1/16" to 9" |
$30.09 |
ARH-BJ.end10= |
9-1/16" to 10" |
$32.93 |
ARH-BJ.end11= |
10-1/16" to 11" |
$35.78 |
ARH-BJ.end12= |
11-1/16" to 12" |
$38.62 |
ARH-BJ.end13= |
12-1/16" to 13" |
$41.47 |
ARH-BJ.end14= |
13-1/16" to 14" |
$44.31 |
ARH-BJ.end15= |
14-1/16" to 15" |
$47.16 |
ARH-BJ.end16= |
15-1/16" to 16" |
$50.00 |
ARH-BJ.end17= |
16-1/16" to 17" |
$52.85 |
ARH-BJ.end18= |
17-1/16" to 18" |
$55.69 |
ARH-BJ.end19= |
18-1/16" to 19" |
$58.54 |
ARH-BJ.end20= |
19-1/16" to 20" |
$61.38 |
ARH-BJ.end21= |
20-1/16" to 21" |
$64.23 |
ARH-BJ.end22= |
21-1/16" to 22" |
$67.07 |
ARH-BJ.end23= |
22-1/16" to 23" |
$69.92 |
ARH-BJ.end24= |
23-1/16" to 24" |
$72.76 |
ARH-BJ.end25= |
24-1/16" to 25" |
$75.61 |
ARH-BJ.end26= |
25-1/16" to 26" |
$78.45 |
ARH-BJ.end27= |
26-1/16" to 27" |
$81.30 |
ARH-BJ.end28= |
24-1/16" to 28" |
$84.14 |
ARH-BJ.end29= |
28-1/16" to 29" |
$86.99 |
ARH-BJ.end30= |
29-1/16" to 30" |
$89.83 |
ARH-BJ.end31= |
30-1/16" to 31" |
$92.68 |
ARH-BJ.end32= |
31-1/16" to 32" |
$95.52 |
ARH-BJ.end33= |
32-1/16" to 33" |
$98.37 |
ARH-BJ.end34= |
33-1/16" to 34" |
$101.21 |
ARH-BJ.end35= |
34-1/16" to 35" |
$104.06 |
ARH-BJ.end36= |
35-1/16" to 36" |
$106.90 |
ARH-BJ.end37= |
36-1/16" to 37" |
$109.75 |
ARH-BJ.end38= |
37-1/16" to 38" |
$112.59 |
ARH-BJ.end39= |
38-1/16" to 39" |
$115.44 |
ARH-BJ.end40= |
39-1/16" to 40" |
$118.29 |
ARH-BJ.end41= |
40-1/16" to 41" |
$121.13 |
ARH-BJ.end42= |
41-1/16" to 42" |
$123.98 |
ARH-BJ.end43= |
42-1/16" to 43" |
$126.82 |
ARH-BJ.end44= |
43-1/16" to 44" |
$129.67 |
ARH-BJ.end45= |
44-1/16" to 45" |
$132.51 |
ARH-BJ.end46= |
45-1/16" to 46" |
$135.36 |
ARH-BJ.end47= |
46-1/16" to 47" |
$138.20 |
ARH-BJ.end48= |
47-1/16" to 48" |
$141.05 |
If you need lengths greater than 48", and up to 96" long,
for the BJ series calculate pricing at $2.65 per inch in EXCESS of 48" + $195.41.
Example:
a 61-3/16" pull would be rounded up to 62". ((62-48) x 2.65) + 195.41 = $232.51 for the pull.
Part number for this pull would look like: ARH-BJ.end62=61-3/16".
|
This third table of part numbers, sizing, and pricing is for the BN series. 7/8" dia. bar with 5/8" dia. standoffs.
The largest size of the four bar diameters. Screw taps are 1/4"x20.
Screws are supplied by Arthur Harris.
Note that the pull center to center (CTC) measurements are 3/4" less than the overall length (OL).
The BN series is more expensive. The bars are solid stainless steel as with the BF, BS, and BJ series. Since
the bars are larger in diameter, they are valued quite higher. It is our recommendation NOT to use the BN series as normal cabinet door pulls. Their application is better suited for large pantry doors,
refrigerator handles, extra wide pull out drawers under cooktops, and anywhere you would like to have a larger diameter pull. For normal cabinet doors, the BF, BS, or BJ series are the better options. NOTE: We are not going to create a part # for all 16 measurements within each inch range. The size range is from the whole number and 1/16" to the next whole number.
IT IS VERY IMPORTANT TO ALSO STATE YOUR OVERALL LENGTH TO THE SIXTEENTH OF AN INCH AFTER THE EQUALS SIGN (=) IN THE PART NUMBER. 8" minimum size in BN series.
|
Generic part number |
Length range in inches (from - to) |
Price each |
ARH-BN.end8= |
8" (minimum size) |
$61.92 |
ARH-BN.end9= |
8-1/16" to 9" |
$69.66 |
ARH-BN.end10= |
9-1/16" to 10" |
$77.40 |
ARH-BN.end11= |
10-1/16" to 11" |
$85.14 |
ARH-BN.end12= |
11-1/16" to 12" |
$92.88 |
ARH-BN.end13= |
12-1/16" to 13" |
$100.62 |
ARH-BN.end14= |
13-1/16" to 14" |
$108.36 |
ARH-BN.end15= |
14-1/16" to 15" |
$116.10 |
ARH-BN.end16= |
15-1/16" to 16" |
$123.84 |
ARH-BN.end17= |
16-1/16" to 17" |
$131.58 |
ARH-BN.end18= |
17-1/16" to 18" |
$139.32 |
ARH-BN.end19= |
18-1/16" to 19" |
$147.06 |
ARH-BN.end20= |
19-1/16" to 20" |
$154.80 |
ARH-BN.end21= |
20-1/16" to 21" |
$162.54 |
ARH-BN.end22= |
21-1/16" to 22" |
$170.28 |
ARH-BN.end23= |
22-1/16" to 23" |
$178.02 |
ARH-BN.end24= |
23-1/16" to 24" |
$185.76 |
ARH-BN.end25= |
24-1/16" to 25" |
$193.50 |
ARH-BN.end26= |
25-1/16" to 26" |
$201.24 |
ARH-BN.end27= |
26-1/16" to 27" |
$208.98 |
ARH-BN.end28= |
24-1/16" to 28" |
$216.72 |
ARH-BN.end29= |
28-1/16" to 29" |
$224.46 |
ARH-BN.end30= |
29-1/16" to 30" |
$232.20 |
ARH-BN.end31= |
30-1/16" to 31" |
$239.94 |
ARH-BN.end32= |
31-1/16" to 32" |
$247.68 |
ARH-BN.end33= |
32-1/16" to 33" |
$255.42 |
ARH-BN.end34= |
33-1/16" to 34" |
$263.16 |
ARH-BN.end35= |
34-1/16" to 35" |
$270.90 |
ARH-BN.end36= |
35-1/16" to 36" |
$278.64 |
ARH-BN.end37= |
36-1/16" to 37" |
$286.38 |
ARH-BN.end38= |
37-1/16" to 38" |
$294.12 |
ARH-BN.end39= |
38-1/16" to 39" |
$301.86 |
ARH-BN.end40= |
39-1/16" to 40" |
$309.60 |
ARH-BN.end41= |
40-1/16" to 41" |
$317.34 |
ARH-BN.end42= |
41-1/16" to 42" |
$325.08 |
ARH-BN.end43= |
42-1/16" to 43" |
$332.82 |
ARH-BN.end44= |
43-1/16" to 44" |
$340.56 |
ARH-BN.end45= |
44-1/16" to 45" |
$348.30 |
ARH-BN.end46= |
45-1/16" to 46" |
$356.04 |
ARH-BN.end47= |
46-1/16" to 47" |
$363.78 |
ARH-BN.end48= |
47-1/16" to 48" |
$371.52 |
If you need lengths greater than 48", and up to 96" long,
for the BN series calculate pricing at $7.74 per inch of length (entire length) + $71.15.
Example: a 61-3/16" pull would be rounded up to 62". 62 x 7.74 + 71.15 = $574.25 for the pull.
Part number for this pull would look like: ARH-BN.end62=61-3/16".
|
This fourth table of part numbers, sizing, and pricing is for the BF series. 3/8" dia. bar with 5/16" dia. standoffs.
This size is great for a sleek look where a thinner pull may be preferred.
Note that the pull center to center (CTC) measurements are 7/16" less than the overall length (OL). NOTE:
We are not going to create a part # for all 16 measurements within each inch range. The size range is from the whole number and 1/16" to the next whole number.
IT IS VERY IMPORTANT TO ALSO STATE
YOUR OVERALL LENGTH TO THE SIXTEENTH OF AN INCH AFTER THE EQUALS SIGN (=) IN THE PART NUMBER.
Maximum length bar for the BF series is 30" long. |
Generic part number |
Length range in inches (from - to) |
Price each |
ARH-BF.end6= |
5-1/16" to 6" |
$21.55 |
ARH-BF.end7= |
6-1/16" to 7" |
$24.40 |
ARH-BF.end8= |
7-1/16" to 8" |
$27.24 |
ARH-BF.end9= |
8-1/16" to 9" |
$30.09 |
ARH-BF.end10= |
9-1/16" to 10" |
$32.93 |
ARH-BF.end11= |
10-1/16" to 11" |
$35.78 |
ARH-BF.end12= |
11-1/16" to 12" |
$38.62 |
ARH-BF.end13= |
12-1/16" to 13" |
$41.47 |
ARH-BF.end14= |
13-1/16" to 14" |
$44.31 |
ARH-BF.end15= |
14-1/16" to 15" |
$47.16 |
ARH-BF.end16= |
15-1/16" to 16" |
$50.00 |
ARH-BF.end17= |
16-1/16" to 17" |
$52.85 |
ARH-BF.end18= |
17-1/16" to 18" |
$55.69 |
ARH-BF.end19= |
18-1/16" to 19" |
$58.54 |
ARH-BF.end20= |
19-1/16" to 20" |
$61.38 |
ARH-BF.end21= |
20-1/16" to 21" |
$64.23 |
ARH-BF.end22= |
21-1/16" to 22" |
$67.07 |
ARH-BF.end23= |
22-1/16" to 23" |
$69.92 |
ARH-BF.end24= |
23-1/16" to 24" |
$72.76 |
ARH-BF.end25= |
24-1/16" to 25" |
$75.61 |
ARH-BF.end26= |
25-1/16" to 26" |
$78.45 |
ARH-BF.end27= |
26-1/16" to 27" |
$81.30 |
ARH-BF.end28= |
24-1/16" to 28" |
$84.14 |
ARH-BF.end29= |
28-1/16" to 29" |
$86.99 |
ARH-BF.end30= |
29-1/16" to 30" |
$89.83 |
|
For Arthur Harris quantities of 25 or more, 10% off the prices below.
For quantities of 50 or more, 15% off the prices below.
Mix and match knobs and pulls or sizes to meet quantity breaks for this special!
This includes all standard and custom sizes.
|
The following links are pages in the Arthur Harris section of our web site. They are shown at the top of each Arthr Harris page too.
7/8" dia Stainless steel knobs
Stainless steel long pulls
5/8" dia Stainless steel knobs
Stainless steel long pulls with legs positioned at ends
Stainless steel T-pulls
Back to back mounted stainless pulls
Pictorial Customer Testimonial (pulls shown mounted in a kitchen)
NOTE: The 5/8" knobs, 7/8" knobs, and T-pulls can also have back to back mounting if you need this.
Please select this link to view information on ordering back to back mounted hardware. Back to back mounted hardware is commonly found on glass doors, shower doors, and passage way doors. The
typical kitchen cabinet door has no need of a back to back mount. Bar pulls with the standoffs at the ends can also be back to back mounted. |
UNIFORM DECORATIVE HARDWARE NAVIGATOR |
|
Previous
Collection |
Change
brands |
Next
Collection |
|
|
|
|
|
